Basic rules and recommendations for the care of the shower

Many buyers are increasingly using shower enclosures for bathroom furnishings. So that the product always remains clean and does not lose its original appearance, it is worth making a regular cleaning of the product. Maintenance of the structure is not very easy, so you should familiarize yourself with the nuances of cleaning the shower stall.

The shower enclosures become very quickly contaminated if you do not perform regular actions to clean them. There are several major the reasons that affect the formation of plaque on the surface of the structure:

• hygiene products (shower gel, shampoo, soap);
• sebum;
• untreated water, including various impurities.

To eliminate the pollution of the shower stall, it is worth considering the recommendations of experts:

• To clean fresh dirt, the cleaning agent must be rinsed off immediately after application to the surface.
• Deep types of contamination need to be treated more carefully, so cleanser should be left for about 15 minutes after the cabin has been treated. Some manufacturers of cleaning products in the instructions indicate the time it takes to eliminate pollution. After that, the product should be thoroughly washed off.
• If even very strong cleaning products did not help to remove dirt from the surface of the shower, then you should try to remove stains with a special solution. For its manufacture per liter of water will require 100 ml of lemon juice or vinegar.
• Perfectly eliminate stains from acrylic or metal surfaces will allow the use of toothpaste. Apply the product to a thin layer of pollution and leave for 5 minutes, then rinse with water.
• After using the cabin, it is necessary to wipe its surface dry, especially this rule applies to glass. The water contains chlorine and calcium, which, settling on the surface, prevent its brilliance. If you do not pay attention to this, over time the precipitation will turn into difficult to remove spots.

• If the shower cabin is not used, then its doors should be open. This will avoid high humidity, which is the cause of mold.
• In order not to damage the cabin during cleaning it with a special tool, you should carefully study the instructions for plumbing and detergent. For example, some substances do an excellent job with stains on glass or plastic, but they are strictly prohibited to be used to clean the chrome coating on metal surfaces. Silver rubbing is ideal for cleaning chrome parts, as it not only adds shine to the surface, but also provides reliable protection from various contaminants.
• Before the first use of the soft cabin, it is necessary to apply a special agent with water-repellent properties to its surface. This will simplify the future cleaning of the product after use.
• Often booth users are faced with a blockage. This problem is due to the fact that the dirt and debris, falling into the drain, form a kind of lump that prevents the passage of water.Solve this problem will help plunger, plumbing cable or special household chemicals.

To clean the showers you can not buy expensive tools, because you can use those that are always on hand. To choose the right composition for cleaning the cabin, you must first familiarize yourself with the effects of these funds. This will protect the plumbing surface from any kind of damage.

This tool can be presented in the form of a powder or solution. The choice depends on the surface of the booth. For cleaning ceramics should use powder. It should be applied to a damp sponge and rub polluted places. After using acid, rinse the surface with water.

For acrylic cab use of powder is strictly prohibited., because it can damage the surface, leaving scratches. It is better to prepare a special solution, which requires only a few bags of citric acid per liter of water. It should be applied to the sponge and clean the cabin surface. After 20 minutes, the product can be washed off with water.

Very often on the walls of the booth limescale is formed. Modern manufacturers offer a wide range of chemicals to eliminate it, but this problem will help eliminate vinegar, which is practically in every home.

To quickly wash the shower with vinegar, you must follow these instructions:

• Make a solution of water and vinegar in a 1: 1 ratio.
• It should be applied to the surface of the cabin with a sponge or sprayer, and then left for 10 minutes for the best effect.
• Next, you need to rinse the cabin with water and wipe dry.

To eliminate various kinds of pollution on the surface of the shower cabin at home, it is necessary to adhere to the recommendations of specialists and perform the following sequence of actions:

• Cleaning plumbing products can begin with doors and walls. They can be made of glass or plastic. The latter option requires more frequent cleaning, since the plastic walls and doors very quickly become coated and become dark.
• If the cabin in the bathroom is located near the wall, then it is necessary to proceed to the cleaning of ceramic tiles. Ceramics is durable, so it can be cleaned with a variety of alkalis and abrasives.

• After that, you can proceed to the washing of metal parts (shower, taps). These elements need to be very careful, as they can lose their luster when they come into contact with strong agents.
• At the very end of the cabin wash you can proceed to the cleaning of the pallet. When choosing cleaning agents, it is necessary to build on the material from which it is made. Attention should be paid to the joints, because it is there that mold is usually formed.

An excellent solution in the fight against limescale is the use of a steam generator. It allows not only to get rid of various pollution, but also carries out surface disinfection. But this method is not suitable for a plastic surface, because This material is spoiled by hot steam.

The most frequent pollution of the surface of the shower are stains from soapy water. To wash the booth, follow the instructions below:

• Regular cleaning. In order to avoid large pollution, it is necessary to wash the cabin after each use. It is possible to get rid of a soap raid, applying usual means for washing of ware. For rinsing the walls and the pallet of the product is better to use hot water. The cabin must always be dry, so after cleaning it must be wiped dry.
• Planned cleaning. Twice a month should be cleaned dushkabinku using special tools, the choice of which should be carried out depending on the material of the product. The tool must be applied evenly over the entire inner surface of the cabin with a sponge. After 15 minutes, it should be washed off with hot or warm water, then repeat the procedure, but only using cold water, and wipe dry.

Mold is very dangerous to health, therefore, at its first manifestations, you should immediately proceed to active actions to eliminate it.

Key secrets to quickly and easily eliminate mold:

• If you use the store tools, you should buy fungicides only. They have a strong effect, so before using them you should carefully read the instructions.
• The popular method, which allows to eliminate the manifestations of mold, is to use a special solution consisting of ammonia and vinegar in the ratio of 1: 1. It should be applied to contaminated places with a brush. Wash off the cleanser should soda solution. For its preparation you will need one teaspoon of soda for one tablespoon of water.

Most hydroboxes are presented with glass walls, which, with frequent contact with water, lose their original appearance. Models made of glass can be easily washed using special means to remove dirt from a mirror or glass. They need to spray on the surface of the product, rub with a sponge and wipe dry. For cleaning the cab of glass, you can use a special scraper. It has on one side a dense elastic band, and on the other - a sponge.

Perfect for cleaning glass fit homemade solution. In a glass of water should dissolve 5 drops of ammonia. This tool is great for eliminating soap stains. Some housewives still add 100 ml of glycerin, which allows you to protect the cabin surface from moisture.

The tray is always cleaned at the end of washing the entire shower stall. To choose the right cleaning tool, it is necessary to build on the material from which the pallet is made:

• Acrylic. Do not use abrasive particles to clean the acrylic tray, as they may scratch the smooth finish when cleaning. A great solution is to use a toothpaste with a whitening effect. It should be applied to the spots and leave for 15 minutes. After the paste must be removed with a soft sponge. A great alternative is citric acid or juice. This tool should be applied to dirty areas for about half an hour.
• Fake diamond. Such a pallet requires regular cleaning, as over time it becomes dark and loses its original brightness. To clean the pallet of artificial stone, you can use a cleaner for toilet bowls. It should be applied to the surface and after 30 minutes to clean the stains with a brush, and then thoroughly rinse the tray.

• Enamel. It is strictly prohibited to use hydrochloric or sulfuric acid, as well as formaldehyde and alkali for washing the enamelled tray. You can prepare a mushy solution of soda, citric acid and water. It must be applied to the spots and after half an hour, rinse with water.
• Tile. Various cleaning liquids and powders are suitable for such a surface.Tiled pan can be perfectly cleaned by the national method. To create a tool you will need a bottle of ammonia, 50 ml of vinegar, juice from one lemon and a half liter of water. It needs to be applied to the tile surface and a little rub with a brush.

Many shower enclosures are complemented by built-in mirrors that require proper care to maintain cleanliness and beautiful appearance. To eliminate stains on the mirror, you can use several methods:

• Lemon juice should be applied to the surface of the mirror, left to stand for 10 minutes and carefully wipe the surface with a soft cloth.
• You can mix in equal proportions of water and ammonia. This tool is ideal for mirror polishing. You can use crumpled newspapers to rub the surface and eliminate stains.
• Alcohol-containing agents help to cope with black pollution. You can create a solution of water and vodka in the ratio of 10: 1. You need to moisten a cloth with this tool and wipe the mirror. Eliminate divorces will help crumpled newspaper.

When cleaning the shower stall, due attention should be paid to the care of plumbing. Parts made from chromed steel need to be cleaned carefully to avoid scratching. remember, that painted aluminum cannot be cleaned with aggressive agentsas this may lead to abrasion of paint.

If the valve is covered with a large layer of salt deposit, which does not even open, then you should take a cloth, after soaking it in vinegar, and wrap the valve completely, closing the food film to prevent vinegar from evaporation. The crane should be left for three hours, and then cleaned of the softened plaque. Vinegar can also be used to remove water stone from nickel-plated and chrome-plated parts, rubber gaskets, hoses, drains and taps.

If the watering can of soul has clogged up, then this may be due to the formation of a lime scale. A good choice is CilitBang., You can use and heated vinegar. The solution should be applied to the sprayer and after 20 minutes, simply rinse with water. After you need to unscrew the watering can and clean all the holes using a toothpick or a needle for sewing.

In order for the shower cabin to always be clean and last for many years, it is necessary to follow a few simple recommendations of specialists.

For cleaning duskabin plastic ideal acrylic cleaning products. To clean the glass doors and walls of the product, you can purchase window cleaner. It should be applied to the surface of the cabin, and then rinse with water after 15 minutes. This procedure will prevent the formation of soap bloom.

Experts do not recommend using powder detergents to clean the shower stall., because they can damage the surface of the product. In order to prevent the formation of pollution, you can use a brush, scraper. Excellent help to eliminate plaque from the surface of the shower scraper called rails. They fit snugly to the surface and are soft. Cleaning the cabin should be done every time after taking a shower.

If you need to eliminate pollution, you can use folk remedies. The best choice is a solution that consists of water, citric acid and soda. It should be poured into a spray bottle, and then sprayed on the walls of the booth. To prepare a cleaning solution for 200 ml of warm water, 20 grams of citric acid and 20 grams of soda will be required. The tool is applied for only 10 minutes, after it must be thoroughly washed from the walls with water. It will give the shower a shine.

If the shower cabin has an acrylic coating, then it is necessary to use only means designed specifically for cleaning acrylic bath. Other cleaning agents may damage the acrylic coating.

It is very difficult to get rid of mold, therefore it is better to engage in prevention and not to bring it to education. The booth requires regular ventilation, the sealant must be regularly treated with special sprays. If the mold still appeared, it is better to replace the old sealant with a new one.

It is better to abandon the use of chemical solvents, since they can spoil the coating of the shower stall. They negatively affect the condition of acrylic pallets and plastic walls.

It is better to always keep the doors of the cabin in the ajar. This will allow moisture to evaporate faster and will be an excellent prevention of mold formation. Vinegar helps in the fight against rust. Better to use it to take a spray. After spraying, wash it off with water after half an hour.

How to clean the shower cabin without a brush and effort, see the following video.