How to clean the toilet from rust and plaque?

A clean toilet always looks beautiful, but often there is rust even with regular cleaning. To clean the toilet from rust and plaque with your own hands, you can use the tools at hand, it is not necessary to buy expensive chemistry.

To clean the toilet from rust, you need to understand what it is from. Rusty streaks and scurf may appear as a result of several main reasons:

• A huge role is played by the quality of water, which usually also includes impurities of various substances, for example, iron. An additional factor could be a leaking tank. From this appear rusty smudges.
• It is worth paying attention to the pipes, namely from what material they are made. If the water supply system is made of non-galvanized pipes, then rust forms in them, which gets into the toilet with water and leaves rusty leaks.
• The roughness of the toilet plays an important role. Smooth surfaces are almost not affected by rust, because it is difficult for it to cling to them. Increased roughness contributes to the rapid formation of rust. Experts recommend to give preference to porcelain products compared to earthenware.

If there is no opportunity to get a new toilet, then you should think about high-quality cleaning of the old one. Experts recommend many ways to flush the toilet from the inside at home. Let's start with special tools.

Powder products have an affordable price, so everyone can afford them. The lack of abrasives is that they require a lot of effort so that they can be used to scrub various types of contamination.

Powder should be applied to the contaminated surface, and then with a cloth to rub hard until the plaque is eliminated. This can take a lot of time and effort.

This chemistry is considered more effective than the use of powder. Alkalis do not require much effort, because they dissolve well any kind of pollution, including rust. They must be applied to the contaminated area and left for some time for the product to come into contact with rust. Then easily removed.

The advantage of using such chemistry is that it does not damage the surface of the product. After using it there are no scratches, and the roughness does not increase.

The effects of rust on acid resemble alkaline agents in many ways, but they are more effective. Experts do not recommend their frequent use. They are useful for removing very dirty toilets.

Acid should be applied to the affected area for just a few minutes.because it acts very quickly. After cleaning, rinse thoroughly with water.With prolonged use of the acid, you can eliminate not only rusty marks, but also enamel coating. The toilet bowl gets rough and loses its attractive appearance. You should look at the action of the acid, and at the right time to eliminate it.

With the eaten rust, the tools that are always in the house perfectly cope. Traditional methods are not inferior in the efficiency of household chemicals, and are also safe and inexpensive.

It is sold in dry form. Oxalic acid should be poured a little on a rag and carefully rub the spot of contamination on the toilet. To protect the skin from acid irritation, all actions should be carried out with gloves.

The use of oxalic acid in the fight against rust is one of the most effective. Rusty streaks begin to dissolve instantly. The advantage of using oxalic acid is that it dissolves very quickly on the surface of the cloth and no longer damages the surface of the plumbing.

This substance is used for batteries, therefore it is familiar to men. It refers to strong acids, so it is also perfect for removing rust. It should be applied to pollution for 10-20 minutes. Time should be adjusted depending on the age of rust.

This tool is related to acids, therefore, it is effectively used to eliminate difficult to remove contaminants in the toilet. Acetic essence should be applied to rust and leave for 30 minutes. A great alternative is citric acid. Do not use regular vinegarsince it will not have the necessary effect on the plumbing surface.

Famous drinks will help in eliminating rust. It is necessary to take a rag, moisten it well with a drink and put it on the polluted place for about half an hour. Next, you will need to rub the affected area for efficiency and rinse with water.

This substance is quite strong and dangerous to humans, so all actions to clean the toilet should be carried out carefully and always with rubber gloves. Do not ignore the respirator, because the vapor of hydrochloric acid can be very harmful to their health.

About 20 grams of acid will be needed per toilet. The tool must be applied to the surface of the plumbing and leave for about 20 minutes, then rinse thoroughly.

Such a tandem allows you to quickly remove rust. In the manufacture of the solution, it is necessary to adhere to the proportion of 5: 100. The mixture should be applied to contaminated areas and left for half an hour. After it is necessary to rub the affected areas with a brush and rinse thoroughly with water.

In the fight against rust and age-old drips will help cope whiteness. The tool must be poured into the toilet and leave on all night. It is very important that the tank does not leak, and also not flush the water. Already in the morning there will be no trace of urinary pollution, and rust will be easily removed.

After removing rust and plaque, each hostess wants to keep an attractive whiteness as long as possible. To prevent the appearance of rusty streaks and various kinds of pollution, It is necessary to adhere to some recommendations of experts:

• Ensure that the tank does not leak. If a stream of water runs along the surface of the toilet bowl all the time, this will lead to sediments that will become more distinct with time.It is enough to make adjustment of a float of a toilet bowl for elimination of this malfunction.
• The use of special tablets can slow down the formation of rust. They need to throw in a tank of water, where they dissolve well. The composition of these tablets include special substances that fall on the wall of the toilet when flushing, prevent the formation of rusty drains. Additionally, they provide a pleasant aroma.
• Using a water purification filter is an effective method for reducing impurities from water that often settle on the plumbing surface. The disadvantage of this method lies in its high cost. Not everyone can afford to buy such a filter.

If you keep the plumbing clean, this will help prevent the formation of plaque and stone. It is necessary to regularly clean the drain tank, because it collects deposits. This procedure should be carried out at least once every six months.

When cleaning the toilet bowl need to apply special gels and disinfectants. They should be applied evenly over the walls of the product, both internal and external. To clean the toilet inside is to enlist a brush. To thoroughly clean the sanitary ware in hard-to-reach places (near the fastening of the lid or under the rim of the toilet bowl), you should use a toothbrush. You can use wet wipes to clean the seat and cover.

It is necessary to fill the neck of the toilet bowl with gel and leave it for half an hour. This will allow the mud to get wet, and then with the help of a brush it can be quickly and easily removed. If you need to eliminate the old traces of rust, then you need to remove the water with the help of a plunger, and then just pour the gel.

To clean the toilet from the outside, you can use paper towels or napkins. It is enough to apply a means for disinfection to the surface, to wipe the entire product thoroughly with a wet towel.

On how to clean the toilet from plaque and rust, see the following video.