How to clean gold at home?

Gold jewelery may eventually bloom. Dirt can ruin the appearance of any products, they begin to fade and look unattractive. Therefore, everyone should know how to clean the gold at home.

Before you start cleaning gold jewelry, familiarize yourself with the features of this process. Learning the finer points of cleaning gold jewelry will help you avoid many mistakes that will ruin the look of your rings.

In many products there are hard to reach places that are quite difficult to clean. Among such places can be attributed convex patterns, stone inserts, decorative ornament. The traditional method of cleaning does not capture these areas, so you will need to additionally use a toothbrush during washing with water. Choose dishes, the volume of which allows you to completely cover the jewelry. Learn the features of the stones. Some of them may not tolerate contact with alcohol and other substances.

White gold differs in its composition from the traditional metal. For this reason, you should carefully select the appropriate cleaning method. In the work, you can use only soft brushes so that the villi do not scratch the metal.

Jewelry can be made of gold of different types, different in color. The most popular is the yellow metal. To clear such gold, there are professional preparations that are sold in jewelry stores. You can also clean the dirt of the gold yourself using available tools.

Choose a product for cleaning jewelry should be based on the type of contamination. You can choose several methods:

• professional cleansing. This method is considered the most effective. During it, special ultrasonic systems are used, returning the decoration to its original state. A similar procedure can be performed once a month;
• non-professional cleaning. This method includes folk methods by which you can clean gold products yourself;

• specialized drugs. To clean the jewelry with your own hands, you can use different types of compounds and acids. In most cases, such funds are served in jewelry stores, pawnshops.

There are several ways that are guaranteed to help restore the original appearance of gold so that it shines. User feedback provides several tools that show a good result.

Many people buy jewelry after a pawnshop. In these organizations, you can purchase original products at a lower cost. However, many may be faced with the fact that the acquired ring or chain have a dull color, which gives the product an ugly appearance.

To restore the natural shine to your products, you can use hydrogen peroxide, wiping the jewels with a cotton pad soaked in it. Also You can combine the drug with a solution of ammonia. This mixture quickly removes any type of contamination.

To restore the rings to their original state, you will need:

• mix 50 ml of ammonia and 100 ml of hydrogen peroxide;
• place the rings in the resulting liquid;
• decorations should be left at 12 o'clock. To prevent evaporation of vapor, cover the tank with a lid;
• then you need to get the product and wipe them with a chamois or flannel cloth.

Purification of gold from dirt using vinegar is an undesirable method for products in which there are inserts of stones. Acetic acid solution can damage the stones, giving them an unpresentable appearance.

If you are the owner of a gold jewelry low sample, refuse this method of cleaning, because in this material there are many impurities in the form of non-ferrous metals, which the acid can cause irreversible damage.

If you decide to choose this method, choose a solution with a low concentration of vinegar - no more than 3%. The acid will need to be half diluted with water.

Soda will help remove the stain in a short time. Many methods are designed for long reaction times. You will need to wait several hours for the product to become clean again. If you urgently need to clean your chain or earrings, it is better to use baking soda.

To give the precious metal a natural shine, you will need:

• fill the container with one glass of water;
• put your jewelry in it;
• put the pot on the stove and wait for the water to boil;
• put one large spoonful of baking soda in boiling water;
• you need to boil the jewelry for five minutes, after which you can drain the water;
• Treat gold with a soft toothbrush.

Some users use dry soda powder, but it is not suitable for working with gold products. This is due to the fact that soda belongs to the category of abrasives, which can damage the material, precious inserts.

With the help of foil, you can restore the attractiveness to gold by yourself. You will need a simple metal foil, water and baking soda. It is necessary to correctly calculate the proportions when mixing, so as not to damage the metal.

To clean the jewels with foil you will need to perform several actions:

• dissolve 50 grams of baking soda in 0.5 liter of hot water;
• lay the foil on the bottom of deep dishes;
• a mixture of soda and water should be poured into a container;
• lower the gold into the selected container;
• products must lie in the solution overnight;
• the last stage consists in washing the gold with water and rubbing it with a soft towel.

Ammonia can effectively eliminate pollution from the metal. To clean the gold, you will need:

• mix one glass of water and a small spoon of ammonia;
• moisten a cotton pad in this solution and thoroughly process the product;
• wash the gold with soapy water and rinse with clean water.

There is another way to use ammonia, for which you will need to combine the chalk powder with ammonia to form a paste. The resulting mixture to wipe the product and wash it with a soap solution. The use of lumpy chalk is not allowed, as it is possible to scratch delicate metal.

There is an easy method of cleaning the jewels with an alcohol solution. You will need to dissolve a few drops of ammonia in a glass of water and put your jewelry into the formed liquid for one hour. Then you can rinse the gold with warm water.To remove significant dirt, you can dilute the mixture with dishwashing detergent.

Many users were able to evaluate the following method:

• Pour a glass of water into the dipper and bring to a boil;
• add one tablespoon of ammonia solution with liquid soap to water;
• place your jewelry in liquid for a couple of hours;
• After 2 hours, rinse the gold in water and wipe it with a cloth.

After cleaning in any of these ways, you will need mustard powder. He will give the product a beautiful shine. The tool is recommended to pour on a soft cloth and rub it with jewelry.

Paste belongs to the category of abrasives, so you need to clean the rings and chains with it. This method helps to clean the diamonds well. You will need to squeeze a small amount of pasta on a rag and polish it with jewelry. It is allowed to use only classic white toothpaste without whitening effect.

Coca-Cola cleans the surface of gold products well. To use this method, you only need a drink. Selected decorations are placed in it for 12 hours. After cleaning, wash them with clean water.

There are several limitations to this method:

• You can not use this option on products with precious stones. Inserts may stain in an incomprehensible shade due to contact with the drink;
• gilding under the influence of Coca-Cola can get off the rings and chains.

This is the most affordable method of cleansing jewelry. You will need dishes, which should pour a glass of hot water. Stir completely 4 large spoons of salt in water. Jewelry should be kept in solution for 12 hours. Then the products are washed with water from the tap and dried.

Self-cleaning of gold from contamination - a difficult task. Separately, we should consider how to clean black gold. If using the methods described earlier you could not restore the products, refer to the mechanical cleaning. This method is considered the most effective.

Do not use abrasives.: baking soda, toothpaste and other drugs, as they can spoil the decorations. Gold is a delicate metal, so it can get scratched from contact with abrasives. To return the darkened metal attractiveness, you need to use special types of pastes. Such tools have a low price and do not harm the coating.

Use a soft toothbrush or tissue. You will need to apply the paste on the darkened rings or chains and make cleaning only in one direction. When you are done, wipe the product with an alcohol solution. It will remove the film that remains after cleaning.

You can create a paste with your own hands for cleaning mechanically jewelry. To do this you will need:

• mix in identical fractions of petroleum jelly, grated soap, warm water, classic toothpaste and crumbled chalk;
• the mixture should be applied to the jewelry with a soft brush;
• clean strictly in one direction;
• At the end of the procedure, it will be necessary to treat the metal with a solution containing alcohol and wipe it with a napkin.

To launder a ring from iodine, you can use a teaspoon of hyposulphite dissolved in a glass of water. In this solution, leave the ring for 15 minutes. Then you should wash the jewel with tap water and wipe it with a dry cloth.

To clear matte gold, try the following methods:

• You will need dishes that add some bleaching powder, a spoon of two-carbonate salt and a spoon of table salt. Pour into the mixture a third cup of water.Products should be placed in the resulting paste for a couple of minutes. Rinse the gold with an alcohol solution and dry well;
• Stir in 10 g of chalk, 5 g of lead white and a half of a krovavik with magnesia. The resulting mixture is required to clean the metal;
• for the implementation of this method, you will need to mix 80 grams of liquid and a little ammonia. This solution should be used to clean contaminated rings, chains or earrings;
• borax solution effectively copes with stains on gold rings. The cloth dipped in it must be wiped with decorations;
• some people remove the darkening with an eraser.

The easiest way to clean the ring with a smooth surface on which there are no stones and other decorative inserts. However, such products are rare. Most women wear smooth wedding rings, diluting them with more intricate jewelry.

New products can be quickly cleaned to shine with a soft cloth. If there are no inserts on the ring, soaking in a soap solution is suitable. New decorations can be cleaned with toothpaste, using brushes with soft villus. Despite the fact that even in gold 750 samples there are other types of metals to give strength, such a material has a plasticity. therefore Care must be taken to ensure that no scratches remain on the product.

On the old gold spots may form or oxidative film. To restore the worn gold, you will help ammonia and hydrogen peroxide.

Mix in 200 grams of warm water a few ingredients:

• small spoon of ammonia;
• 30 ml of 30% hydrogen peroxide;
• one spoon of liquid soap.

Pour the resulting mixture into a non-metallic container and lower your jewelry into it for 20 minutes. Then you will need to rinse the jewelry in tap water and carefully wipe it with a chamois cloth. Alternatively, you can use a flannel cloth.

Gift gold can be cleaned with high quality ammonia. You will need:

• 200 grams of water;
• 0.5 small spoon of ammonia at a concentration of 10%;
• 1 small spoon of dish detergent.

When you drop old jewelry into the resulting liquid, the water immediately becomes a dark shade. Remove them and rinse with water from the tap. Keep in mind that this method is not suitable for working with products in which there are precious stones.

Baking soda solution also cleans blackened gold well. Do not use powder, as an abrasive can scratch your rings and earrings. If you could not return your old gold to its original appearance, purchase a special paste or foam that is sold in jewelry stores. This means you have enough for a long time.

It is possible to clean stone products at home using mechanical methods. When working with precious inserts should be careful not to damage the material. When choosing a suitable method, keep in mind that alcohol can make some types of stones dull.

Moisture is an unacceptable condition for stones, therefore soak a ring or earrings with stones in cleaning solutions will not work. To clean these jewelry you can use a simple cologne. Dip a cotton swab into it and wipe the stone. Cologne can degrease the surface and remove contamination. After this method, you will see that your jewelry shines again.Gasoline also effectively cleans precious things with stones.

Many people are faced with a situation where the diamonds in the rings become dull. You can restore the original shine to your home decoration. When rubbed and heated, stones begin to attract dust and grease. It is impossible to stop this process if you wear rings all the time, so you should learn ways to help restore the dark gold with a diamond. Cleaning should be done carefully so as not to damage the metal surface.

Many people go to the water procedures in the rings and do not remove them when they are in the water. Chlorine, which is present in the pools, aggressively affects the gems, which make them dull and darker. It is able to penetrate the places of adhesions, from where the spots are most difficult to remove. Therefore, experts recommend to remove jewelry before going to the pool.

Jewels with gems should be cleaned. once a month. Wipe your wedding ring or bracelet with a soft cloth, checking the status of the clips and the gold itself. Sometimes the metal requires a little polishing to eliminate minor damage and scratches.

Traditional methods will help you cope with the black on many decorations. However, not every method will be effective when working with white gold. Such a metal is considered special because it does not contain copper and nickel. The surface of the gold is covered with rhodium, therefore the cross or pendant should be cleaned carefully.

You can clean white gold at home by yourself. To do this you will need:

• soft cloth;
• liquid soap or shampoo;
• ammonia solution.

With the help of solutions in which these components are present, you can wipe your jewelry. Soaking white gold for the night is prohibited.

White gold can not be cleaned with tooth powder or paste, salt solutions. You can use a mixture of ammonia and shampoo. To do this, the following method will suit you:

• mix in equal proportions ammonia and water;
• add a few drops of shampoo to the liquid;
• lower the jewelry into the solution for 30 minutes;
• then you need to wash the white gold with water and dry.

The whole world is composed of streams of energy. It is contained not only in the atmosphere around us, but also in ourselves, as well as in jewelry. Gold products have a powerful energy, since such a material is popular. People wear rings every day, in contact with others. Due to the continuous relationship of the jewelry, they absorb all the energy they encounter.

If you received a piece of jewelry as an inheritance or as a gift, they contain a large amount of foreign energy that you must get rid of. The most dangerous are the ancient rings and treasures. Products that were mined from ancient tombs are in a special category, as they were located near human remains for several centuries, absorbing a lot of negativity.

It’s easy to understand that your gold needs to be cleared of negatives. If you began to notice apathy, bad mood and fatigue, you should start to act.

To clean the gold products from the negative of the house, you can use several ways.The main methods to combat negative energy are 4 terrestrial elements, but there are other options that work no less effectively.

The fire contains a great potential for purifying energy. To remove the negative from the ring, you will need to hold the jewelry above the fire for a few seconds. Incense is allowed.

You can also take a lit candle and watch for a few minutes on the flame. Your eyes during this time will be able to maintain the outline of the fire. Then you need to take the product and imagine how the flame surrounds it and burns all the negative.

Ash is a derivative of the flame, so it can also be used to clean precious metal. You will need to put gold in it and wipe it.

This method is the easiest. It is enclosed in a simple washing of the jewels in tap water.

The earth removes well the power of others from the rings. You will need to bury the decoration in the ground for 7 days. When you get the product, it will be cleared.

For this method, you will need a glass filled with salt by a third. Put the gold in the dishes and fill the glass to the top. After 24 hours, you can wear a ring, and it is recommended to bury the used salt in the ground or throw it into the river.

In the method you can use sea or salt. Saline solution also cope well with this task. When cleaning, remember that The item must be removed with a spoon or pencil.

Most believers turn to the church to solve problems of this kind. You will need some holy water and church candles. Put the jewelry on the table and make a circular rotation of the candle. Move counterclockwise.

The number of rotations will depend on your feelings. When you realize that the negative left the decoration, the cleaning process can be completed.

Working with sound vibrations is considered an unusual way that helps to clean the gold from the negative. You can use in the work of the gong, church or simple bells, loud music.

Try to concentrate and imagine how the sound waves enter the gold and purify it from the accumulated negative.

To use this method, you will need to put gold rings or earrings in the place where the direct rays of the sun or moonlight fall. Jewelry should be left for 8 hours. During the process, make sure that you will not be disturbed by cloudy weather.

In order for jewelry to enjoy its brilliance for a long time, you should study the rules of gold care. These recommendations will help you to maintain the beauty and attractiveness of jewelry for a long time:

• Gold must not be allowed to come into contact with alkaline or acidic substances. These components are contained in almost every detergent, detergent;
• if you do not want your gold to fade, exclude the contact of the rings with nail polish remover. Many girls do a manicure right in the rings, wondering why gold has become black;
• Some cosmetic products also contain components of mercury, sulfur and chlorine, which adversely affect the precious metal;
• Before working with paint and abrasive products, remove all jewelry;
• you can not go to the bath, sauna and solarium in gold;
• Do not store jewelry in a cardboard box. It contains sulfur, which will “help” your products to turn black;
• Do not forget to periodically clean the gold from dirt.You can do this at home using the methods that were described earlier.

How to clean the gold at home, see the following video.