How to clean the silicone case: small tricks

The silicone case for a mobile phone is in great demand today. It allows you to protect the device from mechanical damage, gives it a unique design, changing the color scheme. Therefore, after prolonged use of the phone, many are interested in the issue of care for the cover. We understand together.

To prevent the appearance of difficult to remove dirt on the silicone case, you should follow some rules in everyday use. Important:

• Use special wipes to clean the optics or computer monitor. Wet wipes can be a great alternative.
• It is possible to clean the cover every day, and more often if noticeable stains appear on the product.
• Before using the device, wash your hands, wipe the phone after use with wet wipes.

The phone should not be in the same place with sharp elements, because they can damage it. The presence of small scratches adversely affects the attractiveness of the appearance, and also contributes to the rapid contamination.

To wipe the cover of silicone from all sorts of dirt, you can use different methods.

To give the rubber cover the original appearance, it is worth taking advantage of what is always on hand.

To prepare a cleanser, you will need to choose a bit of shower gel, shampoo, dishwashing detergent, liquid soap, as well as water, the amount of which depends on the size of the phone. These components must be thoroughly mixed before foaming occurs.

Next, you need to fully immerse the cover in the prepared solution and leave for about an hour. After the cover, you can easily clean off dirt using a soft sponge. After cleaning it should be thoroughly wiped with a soft cloth.

To prepare a cleanser, it is necessary to mix the soda with water until a slurry forms. Next, the mass should be applied to contaminated places and leave to dry completely, then thoroughly wash the soda from the product under running water and wipe with a soft cloth.

To get rid of hard-washed stains will require more powerful tools.

They can be purchased at the pharmacy. They are presented in the form of small pieces of material, previously soaked in isopropyl alcohol. Tightness of packing interferes with evaporation of alcohol. These wipes perfectly remove dirt, allow to degrease the surface of the cover.

Small packaging is mobile: you can always carry these napkins. They do not harm silicone, but may adversely affect the design of the product. (for example, if it is made of low-quality paint).

To begin with, the cover is soaked in a soap solution, and then with the help of a rigid sponge, it is possible to scrub hard-to-remove stains. After cleaning, the cover should be rinsed with clean water and wiped dry with a soft cloth. This option can erase the pattern, as well as turn the surface of the product from transparent to matte.

It is necessary to moisten a piece of cotton wool (cloth) in acetone, rub the polluted area.This method is allowed to apply in extreme measures, since acetone easily erases the pattern from the cover. You can try this tool on a small area of ​​the product to check its effect on the cover material as a whole.

Silicone cases lose their attractive appearance over time, become yellowed. To get rid of yellowness, you should use one of these methods:

• It is necessary to prepare a special mixture of water, soda and ammonia. All components should be mixed in equal proportions, put on the cover and leave for 20 minutes. After the product must be thoroughly rinsed in warm water and wipe with a soft cloth.
• Silicone case is smeared with toothpaste with a toothbrush, leave for 15 minutes, then thoroughly rinse with water. If the product is not bleached, the cleaning procedure can be repeated.

With prolonged use, the silicone case may become darker than it was at the very beginning. To give it its former appeal, you should use citric acid. This substance is widely used to clean various things, as it is famous for its excellent properties.

To eliminate the darkening of the cover, you should moisten a cloth in a solution of citric acid, then wipe the entire product. After the cleaning procedure, the cover should be thoroughly rinsed to completely remove citric acid from the product. Prolonged contact with citric acid may damage the surface of the case.

For quick and effective removal of old stains, you can use the available tools:

• A weak solution of detergent preparations containing chlorine. It must be applied to the product with a cotton swab or brush.
• Pasty means prepared from soda and water. It will allow you to perfectly remove the dirt, which is firmly embedded in the surface of the cover.

• Alcohol-containing solution. If you soak the product in such a solution, you can easily remove the traces of a pen or felt-tip pen.
• Toothpaste. Means is ideally suited for elimination of old and fat spots. On the cover it is worth applying with a soft brush.

The snow-white cover is impractical to use, since any kind of traces and dirt are immediately visible on it. But even a white product can be restored to its original appearance, using various methods.

For its preparation, you can use any liquid detergent, as well as water. Components should be taken in a ratio of 1: 3. You should take a rag or a soft sponge and wipe the places of contamination effortlessly. After the cover, rinse thoroughly with water. This option will eliminate dust and remove loose dirt.

This option perfectly displays the old spots. For the preparation of such a bath you will need one beaten protein and some milk. You should take a paper napkin, blot it in the solution and apply it on the contaminated place. When the treated areas are dry, use a soft brush to clean the product.

It is necessary to take half a head of onion and rub the polluted places thoroughly with the juicy side. Onion juice perfectly splits the dirt, so after cleaning there will not even be a trace of dirt. There will be only onion smell, but for its elimination it is enough to wipe the cover 2 or 3 times with a damp cloth.

Visual methods for cleaning the silicone case, see below.