How to clean the gas stove grill?

As a rule, when cleaning the kitchen, the hostesses try to postpone the washing of the gas stove grate for later. This is due to the inconvenience of the form (you need to try to get through between the narrow rods), as well as thoughts about wasting time. This is a mistake that most owners of gas stoves make. No wonder manufacturers are trying to produce a predominantly black grille - they are the hardest to see on them. Lack of proper attention to cleaning the grill can lead to metal destruction.

Dirt on the grate settles after each cooking. It doesn't matter if you cooked something fat or just warmed up the soup. Small drops of fat, falling on the surface of the plate, under the influence of hot temperatures quickly lose moisture and instantly grow. Dust is added to them, which, unfortunately, is inevitable in any apartment. To complement the picture can fine hairs and fibers of clothing. So, we had a whole layer of dirt, which can be very difficult to clean, but still real.

After carefully reading the information below, you can find a solution that is right for you.

All grills for slabs seem the same. These are black products in the form of twisted rods. They can be made from different metals. To begin with, it is necessary to determine from which material your grill is made, since the available cleaning method will depend on it. There are only three options:

• Pig-iron lattice. Its material is rough, porous, and the lattice itself is heavy.
• Enameled steel grill. This is a sleek and lightweight instance.
• Stainless steel grill. Such products differ from previous ones in color. If used for a long time, they can burn out in places of contact with fire.

Before you proceed:

• Be sure to wear tight rubber gloves. This will help preserve the beauty of your hands and nails during cleaning. Even seemingly safe cleaning methods imply the splitting of dirt. If the funds can separate the fat particles, then what will they do with your hands?
• Look carefully at the type of construction your grill has. It can be removed from the plate in one piece, in two parts, or not at all. Find out this should be the initial stage of cleaning. Do not despair if the grille is built into the slab, as there are several ways to clean it, even under these conditions. Be sure to cover the surface of the plate with foil to avoid the ingress of cleaning agents into the burners.
• In the removable grids in the configuration may be small parts, gaskets between the metal and the plate. They must be separated and set aside before cleaning.

Different types of grids have their own distinctive features, pros and cons. Much depends on the material from which they are made. Let us consider in more detail the features of the existing and the above mentioned options.

This type is one of the most expensive because of its property to keep warm for a long time and not to bend under heavy pots and pans. It is massive, but also quite fragile. It should not be thrown or cleaned with abrasives (powders with the addition of abrasive particles). It is not recommended to scrape off fat with a knife, because along with the dirt may be part of the material. And certainly none of the steeping methods are suitable for cast iron coating. Long contact with water is contraindicated for this material.

Enamel-coated steel gratings are lighter in weight than cast-iron and less fragile ones. They can be soaked for a long time, which increases the number of cleaning methods. It is not advised to just scrape such material with metal objects, as scratches and chips may form on its surface.

Stainless steel is the most unpretentious material and you can use all the methods listed above to clean it. In this case, the use of metal sponges and aggressive cleaning products is not prohibited.

First, we consider several options for cleaning home remedies that are suitable for all types of metal:

• Steam generator It is possible to use the steam generator without removing the grate. Put a short stiff brush on the device. Having set the temperature not lower than 140 degrees, first steam the small surface to make sure that the required exposure time is required. You will see steam break down fat. Finish cleaning by wiping the screen with a sponge. Repeat if necessary.
• Steam cleaning in the oven. If the house does not have a steam generator, you can use boiling water. Pour a simple liquid into a deep pan and place it on the bottom of the oven. Place the grate on top. Leave for half an hour, then clean the softened fat with a sponge.
• Baking soda. Prepare a mushy composition by mixing baking soda and water. Lubricate the entire grille surface with the mixture. Leave on for 30-40 minutes. Lightly wipe with a stiff sponge, then normal. Wash off the composition.

• Ammonia. This method is only suitable for removable arrays. Place the item in the package. Pour into it a vial of liquid ammonia, tie it tightly. Gently turn the bag over several times to distribute the alcohol on its inside. Leave overnight. We advise you to use the balcony, as ammonia has a pungent smell. Rinse thoroughly in the morning with a sponge.
• Mustard. Mix mustard powder with hot water until it forms a pasty consistency. Apply this compound to the grid. If there is a particularly strong pollution, then the grid should be put in the package. After 2-3 hours, wash the fat with a sponge under a stream of hot water.
• A mixture of soda, mustard, salt and vinegar. Mix four ingredients: soda, mustard, salt, vinegar in equal proportions. Spread the mixture onto the surface with a damp sponge and leave overnight. Rinse thoroughly.
• Melamine sponge. If you have already used it, you should have appreciated all the benefits. With its help you can clean almost any pollution. It is enough to slightly wet the sponge, and then wipe all the necessary places.

Having described universal methods, we proceed to the methods of cleaning a particular type of lattice.

Today, in almost any supermarket you will find at least 5 types of effective means for cleaning carbon deposits. Having seen the inscription "Anti-fat", you will understand that you are going in the right direction. Household chemicals differ not only in price, but also in the method of application, processing time and aggressiveness of the composition.

The compositions of the category "Anti-fat" are divided into three types: powders, creams (gels), sprays:

• Powder products are applied with a wet sponge to the surface to be cleaned. The content of abrasive particles helps to wipe off fat, but can lead to the formation of scratches on the metal.
• Creams and gels are the most popular means in the fight against dirt. Their soft composition does not harm even the fragile enamel. You just need to put it on the grid, give a means to act (time may be increased depending on the degree of contamination) and rinse thoroughly with water.
• Sprays are available relatively recently. They are convenient to use, but due to the spray application method, they are quite harmful to health.

Consider the most popular cleaning products and reviews of hostesses to them:

• Bagi Shumanit. Manufacturer - Israel. Available in two forms: gel and spray. Both types of products do not leave scratches on the material. It is recommended as a means of removing any, even the most severe pollution, accumulated over the years. However, users note the lack of complete information on the chemical composition of the cleaner. Possessing high toxicity, it is absolutely not recommended to use it without gloves and without good ventilation. After application to the surface, it is necessary to leave the room, and after the time has elapsed, rinse the screen thoroughly with water. Speaking about the price, the gel "Schumanit" refers to the average cost of household chemicals. Spray is about two times more expensive.
• Amway. Manufacturer - Belgium. Gel for stoves and ovens has established itself as a high-quality cleaner from grease and soot. Thick consistency allows you to completely cover the treated surface. For drawing the special brush is provided. The drug is washed off easily (with a damp cloth) due to the lack of abundant foam. Of the pleasant bonuses can be noted cover with protection from children. The downside of the gel is the high cost.

• Sanita Anti-fat. Manufacturer - Russia. Domestic tool is presented in all possible varieties: gel, spray, powder. Reviews on the Internet are different: from enthusiastic, enthusiastic, to negative. With a small accumulation of fat, this tool copes with a bang, and for sustainable take a lot of time. It has a pleasant smell. Of the biggest advantages of the hostess means a low cost. The disadvantages include a flimsy cover, as well as the presence of unknown "other acids" in the composition.
• Frosch. Manufacturer - Germany. All Frosch products advertise themselves as safe, made from natural ingredients. However, the use of a spray to remove fat is again recommended only with gloves. Unfortunately, according to consumers, the tool is good only at the stage of the appearance of pollution and is not suitable for persistent soot.
• Faberlic. Manufacturer - Russia. Gel series "House of Faberlic" earned the love of hostesses due to its soft texture, economical packaging, subtle smell, as well as attractive price. A lid with child protection adds another plus to the money box of this tool. But the lack of a dispenser is a disadvantage, which is noted by almost all users. The cleansing ability of the gel is also in doubt. Despite the rather aggressive composition, it will take a lot of effort to clean heavily soiled grids. If you have enough time and patience, this drug should be given a chance.

• Cream Cif. Manufacturer - Hungary. The means, which declares itself as a cream, really has a soft formula and gently cleans the surface. The composition is quite sparing, which can not but rejoice. According to the instructions, the cream must be kept on the surface to be cleaned for no more than a minute, but this is a controversial point. This time is enough to remove fresh dirt, but you will have to wait to clean up the eaten fat. And even after a long wait, you will need to thoroughly rub with a sponge or brush to achieve the desired result. Cleaner refers to the average cost of household chemicals.
• Meine Liebe. Manufacturer - Germany. The main advantage of this tool - the delicacy of the composition. It lacks chlorine, phosphate, and other harmful ingredients. Amazingly, with such content, he copes with dirt and grease. Neutral smell, the average price conquers buyers. The disadvantages are some difficulties with flushing.
• Eco-max. Manufacturer - Canada. Eco-lovers should pay attention to this tool.You will not find alkaline ingredients in its composition. Available as a spray, which facilitates application. Of course, the tool is not as effective as its alkaline brothers, but the hostesses recommend it as an effective cleaner. Frightens off a rather high price.

Guest housewives on the Internet are controversial. Understand what tool is suitable in a particular case, you can only. Be sure to carefully read the instructions on the package before use. To prevent the adverse effects of household chemicals on health Always use them with good ventilation.

Methods for cleaning gratings are largely dependent on the material of which they are composed. Previously, we analyzed which types are divided into these parts. Now let's take a closer look at which cleaning methods are most effective.

For example, the most popular method of cleaning cast iron is calcination. The easiest way to do this is living in a private house or in a country house on an open fire. The grate must be placed over the fire, turning over periodically until the grease and dirt disappear. At the end, wipe the part with a slightly damp cloth. If you live in an apartment, you can glow the grill over the gas stove, but be sure to open the windows and also turn on the hood.

Inventive housewives suggest using a not very tough brush head on a drill. It must be installed on the device, turn on and drive over the entire surface of the grid to achieve a result.

If your family has a car you can use car wash detergent. It must be applied to the sponge, and then carefully treat the grid. After that you need to rinse the part and dry it.

The easiest cleaning method for an enamelled steel part is to place the rack in a dishwasher. If the pollution is small, a high temperature mode will do. If the dirt is densely ingrained, then use additional soda tablets.

Soda is good and in the absence of the machine to wash dishes. Place the grate in a large durable bag, feel free to pour inside a pack of baking soda, and then fill it with warm water. Tying the bag, leave the grill for several hours. Will only rinse and dry thoroughly. If the lattice dimensions allow, you can soak it in the sink, after closing the drain.

To save the situation also helps laundry soap. You will need a container in which the grille will fit. It is necessary to prepare a strong soap solution, then soak the grate overnight.

If you are not a fan of long mechanical work, prepare one of the pastes to help you cope with the task:

• 100 g of laundry detergent mix with 30 ml of ammonia. Process the metal and wash thoroughly after 20 minutes.
• Prepare a slurry of hydrogen peroxide and baking soda, grate it well, rinse thoroughly.
• Mustard powder diluted with 9% vinegar, as well as a small amount of dishwashing liquid. This paste is applied to stainless steel. After 25 minutes, cleaned under running hot water.

Consider some helpful tips that will help you clean the grill without hurting it:

• Never soak a cast iron grate in liquid or wash it in a dishwasher. The material may become cracked and lose its strength.
• Any metal begins to break down if you put a hot lattice in cold water or solution. We advise to cool it before cleaning.
• Do not try to scrub the surface too violently with metal brushes. This will lead to the destruction of the material.
• It is necessary to wipe the grate dry every time after cleaning.
• To facilitate further cleaning, you can use the following method. We will need stationery transparent glue (50 ml), washing powder or detergent (2 tablespoons), soda (150 g). The ingredients are thoroughly mixed, and the composition is applied to the grid. After drying, it disappears from view. All that is needed during the next cleaning is to clean the applied layer, and with it the contamination will come down.
• The simplest way to maintain cleanliness is to wash the grate after each cooking, and for steel gratings, soak once a week in a soapy solution.
• You can soak the lattices not only in a separate basin, but also in the bathtub, as well as in the sink.
• If you are unable to achieve the desired result the first time, do not despair and just repeat your actions when the opportunity arises.

Each of the above methods of cleaning the grid can cope with the task, the difference is only in time and effort. The choice of folk remedies or household chemicals is always yours. It is believed that the kitchen is the face of the hostess. If you do not regret a few minutes for daily cleaning of the grate, you will not have to be upset because of an unpleasant deposit. It not only spoils the look of the plate, but also your mood. Even dishes cooked in clean and pleasant conditions become tastier.

To learn how to quickly clean the grate of a gas stove, see the next video.