How to brush a hair comb?

Combs and hairbrushes tend to get dirty quickly. This is facilitated by the natural biological processes occurring on the scalp, the use of tools for styling and fixing curls. The method of purification depends on the material of the comb and the intensity of its pollution.

Wooden combs and combs are environmentally friendly and aesthetic. They are useful for hair and scalp, but short-lived, get dirty quickly, require timely care. Traditional washing with abundant moisture does not suit them, therefore cleaning should be dry and gentle. Initially, you need to remove small debris in the form of villi, hair residues and dust. Then it is necessary to dip a cotton swab into the alcohol-containing solution and treat each tooth of the comb.

It is not recommended to use products containing fragrances. The smell of cologne, toilet water is firmly absorbed into the tree. It is better to use ordinary alcohol or vodka. Change cotton swabs should be as they are contaminated.

Wipes or cloth should be used for cleansing.

It is necessary to clean wooden products at least 1 time in 2 weeks with short hair, 1 time a week, if the curls are long. After processing, the comb should be wiped with a dry cloth and dried in a well-ventilated room (away from heating appliances).

To clean plastic combs, there are several ways. First you need to remove a greasy layer of dirt and hair residues with a toothpick, knitting needles or needles. Next, you should prepare a solution of two glasses of warm water, a tablespoon of ammonia and several caps of liquid soap (shampoo). In the resulting composition must be put comb for an hour. After the required time interval has passed, it is necessary to rinse the product in this liquid with a brush, then rinse it with cool water.

The following method consists in processing the accessory with a mass of toothpaste and dishwashing liquid. The resulting mass is applied to the comb for 5 minutes. Then the dirt is thoroughly cleaned with an unnecessary toothbrush. At the end of the cleaning, the comb should be washed and wiped dry.

The third method of cleaning requires a glass of hot water and 4 tablespoons of soda. In the resulting solution dipped comb for 20 minutes. Then you need to wash it with a brush, rinse and dry. The fourth method is to use shaving foam, which is applied to the contaminated surface and after a third hour clean it with a toothbrush. Contamination will be removed along with foam. It is recommended to wash the plastic comb every week, to buy a new one - every 4 months.

Comb brushes made of natural bristles contribute to a uniform distribution of sebum over the entire length of hair, which prevents dryness of the curls and reduces the risk of the split ends. This accessory is not prone to the accumulation of static electricity, it has a moderate massage effect, improves blood circulation of the head. The downside of the raw materials used is stubble tendency to dirt. To clean the comb, use a solution consisting of a liter of water, 3-4 tablespoons of shampoo and 1 teaspoon of ammonia. Place the product in the prepared mass for 10 minutes, then clean it with a toothbrush and rinse.

It is not recommended to process natural bristles with pure alcohol and liquids containing silicone. To dry the comb should be down the pile, placing on a napkin or towel. To prevent severe old contamination Cleaning is recommended every week. With a slight salting of the bristles, you can use a solution consisting of water and shampoo (without the addition of ammonia).

The low popularity of metal combs is associated with the risk of injury to the scalp and hair shaft, the inability to use them with colored and damaged hair. The metal enters into a chemical reaction with dyes, which adversely affects the structure and color of hair. For cleaning metal combs, you can use abrasive and liquid detergents. When cleaning with powdered preparations, it is enough to apply them to a damp sponge and clean the surface.

When removing heavy old contamination, dilute the detergent solution and hot water in a small container, place the product there and leave for an hour. After the specified time, the comb should be washed in the same water with a toothbrush, rinsed and wiped dry.

You can use shampoo or dishwashing liquid. After cleaning the main pollution comb must be sanitized. This should be done by any available means (alcohol, vodka, hydrogen peroxide). Alcohol-based liquids with fragrances and fragrances are allowed. Metal does not absorb odors, so it can be completely treated with cologne.

Brashing has a round base with natural, artificial or metal bristles, used for styling hair and creating hairstyles. May have a simple, thermal design. The base can be wooden, ceramic, plastic or metal. Due to the heterogeneity and simultaneous presence of two or more materials of different characteristics these combs require delicate cleaning, they are subject to strong and rapid contamination. This is due to the use of varnish and other means of fixation, the ability of the circular bristles to accumulate a greater amount of lost hair.

To remove fine mechanical debris from the brushing, it is necessary to brush the rest of the hair with a spray for shine: this will allow you to gently pull them out using a knitting needle or a toothpick. Next, you should prepare a solution of 1 liter of warm water, 2 tablespoons of shampoo and 1 tablespoon of ammonia or hydrogen peroxide. Then you need to soak the comb in it and leave for an hour. Products with a wooden base can be in the water for no more than half an hour. After the desired time, the comb must be rid of plaque with a toothbrush. To dry the product should be in a well-ventilated area or with a hair dryer.

Universal option that is used for all types of hair, including thick and long. Such products have a moderate massage effect. they have a positive effect on dormant hair follicles, causing hair growth. Brushing massage should start with the removal of residual hair, lint and fine threads. Then you should put it in a solution consisting of 1 liter of water, 4 tbsp. spoons of shampoo and 3 tbsp. spoons of 9% vinegar.

After ten minutes the comb should be taken out, thoroughly cleaned with a toothbrush, then rinsed and left to dry. Vinegar can be replaced with ammonia, instead of shampoo, you can use liquid soap and dishwashing detergent. You can dip a wet toothbrush in soda and clean the base of the massage, rinse in a solution of vinegar, finally rinsed in cool water.

There are special solutions for the splitting of fatty contaminants and disinfection. They are used in hairdressing and beauty salons, they are all commercially available, so if you wish, any of them can be purchased.The most common and versatile tool is "Guardian". This is a compound with a broad spectrum of action that can be used for degreasing, cleaning, and effective disinfection of combs. The tool is suitable for any type of combs and brushes made from any material.

All combs periodically should be subjected to antiseptic treatment. This will prevent the occurrence of fungus and the reproduction of pathogens. In case of moderate contamination, it is enough to wipe the product with a damp cloth with a bactericidal effect. You can stand a comb for three hours in a densely concentrated solution of dark laundry soap.

A good tool is a solution of water and bleach in a ratio of 9: 1. The time for soaking combs is 1 hour. From professional tools you can use Alaminol, Aquaminol and Alpinol. Their price is slightly higher than the cost of home remedies, but their high efficiency and ease of use make these drugs quite popular. Regular and proper cleaning of hairbrushes at home will allow them to extend their life and keep their original look for a long time.

How to quickly clean the comb, you will learn from the following video.