How to wash the tiles in the bathroom from the raid?

One of the main problems that each housewife faces when cleaning the bathroom is associated with effective cleaning of tiles from lime and rust, without causing harm to health and without damaging the surface of the tile. After all, most modern detergents contain in their compositions various alkalis and acids, which must be handled with the utmost care.

In this article we will talk about how to get rid of various impurities on a tile in a bathroom with the help of various means. Consider what popular methods exist, and which of them are the most effective and economical. After all, only proper care will help to keep the coating clean and shiny for a long time.

Tiled or ceramic tile is a durable and very durable material, which is why it is very often used for finishing in the bathroom. With proper care, this facing material will last more than a dozen years and retain the original gloss and shine. In addition, among the advantages of such tiles can also be noted:

• a huge selection of colors and shapes that allows you to implement any design in the bathroom;
• excellent wear resistance to temperature, steam, grease, chemicals and cosmetics;
• simplicity and ease of use and cleaning.

So as not to run pollution, clean the tile regularly. Most housewives know that, first of all, limescale appears on the surface of the tile, the cause of which is too wet and hard water. In addition, it is not possible to avoid the appearance of rust and mold. Few people think about it, but shampoos, shower gels and toilet soap that we are used to also leave marks on the tile.

At the started pollution to wash a tile it will be much more difficult. And this will require additional efforts, primarily in the form of financial investments, and will also have to spend several times more energy and time for cleaning. Therefore, preventive measures are much more efficient and less costly.

Before you wash the tiles, you need to understand the nature of the pollution. This is necessary in order to choose the right cleanser and method of its use. The main types of pollution on facing materials in the bathroom are:

• Limescale - we mentioned it above. The main reason for its appearance is water droplets, which contain various minerals. Especially a lot of these additives in hot water, it often leaves whitish marks and stains. If they are not immediately removed, then over time the tile surface will become muddy and rough. Subsequently, to get rid of this stubborn dirt will be hard. Prevention of limescale is the use of soft wipes, which you need to wipe dry the surface of the lining after taking a bath.

• Mold in the seams and fungus - appear due to dampness and poor ventilation of the room. For the bathroom, these pollution are a big problem. Mold and fungi grow very quickly and are primarily harmful to human health. These pollution look like dark and even black spots. Qualitatively remove blacks will help special tools, containing a variety of acids.But these cleaning fluids should be handled with care, rubber gloves and a face mask should be used to prevent skin fumes and inhalation of harmful vapors.

• Rust - usually appears due to poor quality water. Remove it will help various detergents. Unfortunately, it is almost impossible to prevent rust on your own. Therefore, only regular cleaning and cleaning will help to keep the facing covering clean.
• After repair very often you can see grout stains on the facing surface. Of course, until the material is frozen, you can quickly remove it. But the dried grout will be quite difficult to clean from the tile, especially if the surface has a relief pattern. Currently, cement grouting material and epoxy resin are used for sealing joints. To remove them, special acid-based softening agents are usually used.

• Sealant - used for sealing cracks and joints of tiles. It consists of silicone, which is added for a more durable grip. Therefore, it is very difficult to remove the sealant from the lining. In places where scratches do not appear, you can use a sharp knife, which you need to carefully cut off the protruding parts of the material. Special chemical compounds, for example, solvents that will soften the silicone, will help to remove the tiles on more visible areas of the tile, and then it can be erased from the surface of the lining.
• Sometimes in the process of repair on the tile may fall welding dross. Ugly stains appear on the surface of the tile, which can be easily removed from the unglazed tile with any detergent. If you have a glazed facing coating, then removing welding stains is almost impossible. In this case, you will have to replace the damaged tile.

As you can see, in the bathroom you can cope with almost any kind of pollution. You just need to have the necessary knowledge and make some efforts for high-quality cleaning.

To tile in the bathroom pleased with their brilliance, you can use not only professional detergents, which contain various chemical compounds and acids, but also popular recipes. At home, you can easily and quickly prepare high-quality mixtures that can quickly clean the facing coating and give it an original look.

Consider the most popular ones:

• Gruel of vinegar and baking soda able to remove dried grout from the tile surface. To do this, mix the ingredients in the same proportions, and apply the mixture to the contaminated surface. Twenty minutes later, clean the tile with a soft brush and rinse with water.
• Lemon acid removes limescale and gives shine to the surface. You can use squeezed lemon juice, pieces of fresh lemon or citric acid solution (1 tsp. Per glass of water). Just wipe the dirty area and leave for a deeper impact for 15-20 minutes, then thoroughly clean the surface with a soft brush and plenty of water. This tool is one of the most effective and economical at home.
• Remove frozen grout, limescale and sealant will help liquid ammonia solution (1 tbsp. L.) and water (1 liter). Instead of liquid ammonia, you can use white spirit. Apply the prepared mixture on the contaminated facing coating, leave for 10-20 minutes, then rinse with plenty of water.

• Usual dishwashing gel help to cope with light pollution. It must be applied to dirty places, leave for a quarter of an hour, then rinse with plenty of water.
• Getting rid of mold and germs will help bleaching powder. Of course, the smell is a little unpleasant, but this tool is very effective. It is necessary to dilute the chlorine powder in water, apply the resulting solution to the tile, paying careful attention to the seams. Leave for a deeper effect for 10 minutes, then wipe the contaminated areas well with a brush and rinse thoroughly with water.
• Bleaching darkened seams will help ordinary hydrogen peroxide. It should be applied to the surface, leave for 15-20 minutes, then carefully clean the seams with a brush and wash off with plenty of water.
• Via steam cleaner You can get rid of not only limescale, but also thoroughly clean the seams of fungus and mold. This device heats the water to a high temperature so that steam is formed and cleans the surface with a powerful jet. The great advantage is that the steam cleaner allows you to remove germs, thus disinfecting the surface and the bathroom as a whole.

Of course, most housewives use special detergents to clean the cladding in the bathroom, which can be purchased at any store. Below we look at the most common of them, tell for which types of pollution they are more effective, and what feedback have certain means:

• Mr Muscle (“Bathroom Expert”). The manufacturer indicates that the tool cleans dirt, disinfects, gives shine, leaves no stains. The cost of 250 rubles. It is applied to the surface with a sprayer. According to customers, the tool cleans well ceramic tiles and seams, as well as plumbing. After its use, there really are no stains, the surface becomes clean and shiny. But with too old pollution can not cope. Suitable only for daily maintenance of cleanliness. Among the minuses marked by an unpleasant acrid citrus aroma.
• Cilit Bang ("Antinalet + Shine"). The manufacturer notes that this tool is struggling with limescale, rust, soapy stains and stubborn dirt. The cost of 250 rubles. On the bottle there is a spray for easy application. Customers mark this tool as one of the best. With it, you can easily remove complex dirt, not only from the tile on the wall, but also on the floor. To do this, leave the product for 5-10 minutes on a dirty surface, then rinse with plenty of water. Using Cilit Bang, you can easily clean even embossed tiles without any extra effort. Among the cons of the hostess note an unpleasant pungent smell.

• Domestos ("Double Power"). The manufacturer assures that the product kills germs and maximally cleans the surface. The cost of 180 rubles. Most customers say that with the help of Domestos you can wash not only the bathroom, but also the toilet. Thanks to this tool, it is much easier to clean tile from mold and plaque at home than by other means. Of the minuses note that the liquid has an unpleasant smell of chlorine and with its help you can not wipe off the rust.
• Cif ("Anti-Plaque"). The manufacturer indicates that the tool removes limescale, stubborn dirt, soapy stains. The cost of 180 rubles. Most customers note that using Cif can clean the surface of the tile that is matt from plaque, and in a matter of minutes the lining will find its original shine. In addition, the tool copes with the old dirt and rust. And also the relief tile is cleaned with little effort. Among the shortcomings of the hostess note persistent smell of chlorine.

• Comet ("7 days of purity"). The manufacturer writes that the tool removes lime and rust, disinfects and keeps up to seven days clean thanks to the protective layer. The cost of 200 rubles. Customers note this tool as one of the best for cleaning the bathroom, as it copes with its functions. In order to remove old stains and tile glittered like new, it is necessary to leave the liquid on the surface for a deeper effect for 10-15 minutes. Hostesses separately indicate that no trace of rust remains in a matter of minutes. The smell of a chemical agent, but not caustic, like many similar tools.
• Unicum ("To clean the bathroom"). The manufacturer writes that the tool adds shine and cleanliness to the bathroom and toilet room, instantly removes soap and lime deposits, rust, mold, fungus, leaves a protective nanolayer that prevents contamination in the future. The cost of 200 rubles. Housewives note that this liquid has a pungent odor and cannot cope with old stains and mold. But perfectly removes plaque, rust, polishes the surface.

• To remove mold customers use a special tool from this manufacturer. - Unicun ("To remove mold in the bathroom"). This fluid removes mold and mildew from any surface for a long time in seconds. The cost of this product from 180 rubles. Customers indicate that this is one of the most effective means to combat this problem. There is a chemical smell, but not caustic. Cons of this tool is not marked.
• "San Wedge" ("Santik") - liquid for cleaning tiles, faience and sanizdely. The manufacturer promises to remove limescale, rust and other contaminants. The cost of 180 rubles. The hostesses noted that the tool copes with the main tasks, but the old stains are beyond its power. Among the minuses point to an unpleasant smell and the appearance of chemical burns on the skin, if you do not use gloves.

There are a number of simple recommendations that will help keep your bathroom in perfect condition:

• If you want the veneer to always delight you with cleanliness and shine, you need to wipe the water drops off the surface immediately after they appear. To do this, use soft microfiber cloths that do not scratch the tile.
• To keep the bathroom from getting damp and mold, install a good ventilation system.
• If you want to add extra shine to the tile, you can use regular glass cleaner. It is worth noting that this tool can be used daily, without fear of damaging the lining.
• For dark tile, do not use a solution of warm water with soda, as the latter can leave behind white stains.
• Textured tiles require more thorough cleaning, as dirt can accumulate in the recesses of the pattern. For such washing, soft brushes and napkins with large pile are suitable.
• Experts recommend changing the grout every few years. Thus, you remove old material with damage from mold and mildew. Then it is necessary to treat the joints with an antiseptic, and again seal the seams.

• When using any cleaning agent, do not immediately apply it to the entire surface. At first, try how the facing will behave in a less visible area.
• Be sure to observe safety measures when using any detergent: protect your skin with rubber gloves, wear a face mask so as not to inhale toxic fumes of various acids.
• When cleaning the veneer, it is better not to use abrasive cleaners, as they will easily damage the surface.

Some housewives use polishing wax to give shine to the tile. This tool is mainly used for cars. Polish must be diluted in water and applied to a clean and dry veneer. After a few minutes, the surface should be wiped with a soft cloth. Wax will give a beautiful shine to your tile, and the special water-repellent properties of polish will prevent the formation of lime deposits.

As you can see, maintaining cleanliness in the bathroom is a snap. The main thing is to remove contamination on time, then the tile will always sparkle like new. And the tidy bathroom will always speak of you as a good hostess.

How to clean the tiles in the bathroom to the crystal purity, see the next video.