Electric foot file

Foot care at home is not inferior to procedures in the cabin. Every woman has the same professional tools, tools, and even electric pedicure devices. Considering that at home a woman can only do classic edged pedicure is a real delusion. You can make a mixed or hardware pedicure, if there is an electric sanding file for the feet. This device is extremely simple - a roller with abrasive on the handle, which rotates at high speed and cleans the foot from dead skin. The file is powered by electricity. There is one minus for such a tool - the cost and purchase of consumables.

The advantages of a dry pedicure are forcing more and more women to abandon the classic way of treating their feet and switch to hardware cleansing.

Using a power saw for legs makes it easier and faster to make heels smooth. You do not need to rub yourself, efforts are not applied, the skin does not need to be constantly moistened. Save time and effort.

Preliminary preparation is not required: steaming and putting creams and oils. However, it is worth preparing for the fact that skin dust can rise in the air, and not everyone likes it.

These pedicure devices are used to maintain a good condition of the feet. If you have problems in the form of strong pains, deep cracks and increased dryness, you will need a mixed type of care: working with pumice stone on a moist surface, moisturizing your skin twice a day with creams with aggressive moisturizing, softening and antiseptic components (for example, urea), and then already - hardware grinding.

Many manufacturers produce electric files for a pedicure. The principle of operation and the appearance of them are similar, but of course there are differences.

This model is one of the most popular among women. Its estimated cost ranges from 1,100 to 1,500 rubles. The following trifles make this file popular:

• Work from the mains and from the battery, while you can use the device during the charging process.
• The moisture resistance of the case, the ability to wash the roller under water without fear of spoiling the machine.
• Two rollers in the set: one for grinding, the second for soft polishing. This is very convenient, given that often after sanding the skin is not perfectly smooth.
• Rotational speed - 3000 per minute. Powerful enough to quickly eliminate the "weekly fatigue" from the feet.
• Included are dividers for fingers and a brush for cleaning.

The weight of the device is 400 g, which is quite a lot, considering that a normal depilator weighs about 75 g. However, most likely, the manufacturer indicated the weight with packaging and accessories.

This model is already more expensive, on the manufacturer's website it is priced at 2,200 rubles. In this case, nothing remarkable in it. The device does not work on the battery, but on four finger-type batteries. Keep track of when they sit down, impossible. The declared rotation speed is 40 revolutions per second, it is only 2400 revolutions per minute. With such power, the file does not polish slightly heels.

Of the benefits can be noted carbide silicon coating on the nozzle, which allows you to do a pedicure on both dry and wet skin.In general - for a higher price, the user receives a less functional device.

File from Avon - a direct competitor of the above model from the Swedish corporation (at a price of about 1000 rubles). This device is made of plastic, made in China, has a roller of abrasive paper and is powered by two AA batteries.

It is inconvenient that it is not in the free market - you have to wait for it to appear in the catalog. All women complain of low power, which does not allow to make a pedicure quickly and efficiently. From the long movement of the nail file on the heels, the arm gets tired - it is easier to rub your feet with a pumice stone once a week. However, someone says that it's about low-quality batteries. For the device to work well, powerful batteries are required. However, the price of the file "bites" less than in Oriflame.

A model that is not inferior to the very first of the review. Its cost also varies in the range of 1500-1700 rubles in the domestic market. Judging by the reviews, it can be noted that the quality is not bad. If you try, you can order this file on the famous Asian trading platform - 700-800 rubles.

The distinctive feature of the file Scarlett - the inability to work from the network adapter (first charged, then made a pedicure). The disadvantage is the absence of a charge indicator. A woman cannot know how much energy is enough for her. You may have to interrupt the procedure and wait an hour while the file is a little charged. Full charge cycle - 8 hours.

Included with the device are two nozzles and a cleaning brush. The big advantage is that the nozzles are sold freely available and cost around 350 rubles per pair - you do not have to wait for months until the necessary goods are brought to the warehouse.

When choosing a nail file that works from a battery, you should be guided by personal requests: it is important for someone that it is light, someone likes antimicrobial - and so on.

If you often suffer from irritation, then choose a file with a silver-coated roller that prevents the growth of germs.

If you have not very good lighting in the bathroom, then it is better to stay on a file with a built-in light (like a depilator).

If your skin is too sensitive, then you need to look at the size of the abrasive particles on the rollers (the smaller the better) and low power (so as not to injure the delicate skin with a high rotation speed).

If you take a file for professional work, you will need to adjust the speed (under the skin of each client), as well as the presence of antiseptic coating on rollers, waterproof case (so that it can be sterilized) and diamond dust in the abrasive (so as not to be erased).

If you choose the best from the huge range of electric files, then any one that has a laser notch on the abrasive is in the lead. She copes not only with minor flaws of the heels, but even with coarse corns. The speed and quality of cleaning is high, such devices carefully remove dead skin, while grinding it.

The next most popular are high speed devices. Ideally - 4000 rpm, acceptable - 3600 rpm. If the rotation speed is lower, then the file is suitable only for thin skin.

If you read negative reviews about electric foot sanders and you believe everything, then make allowances for the features of each woman's skin. Read the specifications and compare them with your requests.

The use of professional electric file for heels has its own characteristics.Failure to follow the recommendations may result in either a breakdown of the device or damage to the skin of the foot. The following important recommendations can be highlighted:

• The skin should be clean and dry before the procedure.No need to steam your feet before a pedicure. Sanding heels for wet, sweaty skin is not performed. From this, the abrasive is clogged, and the further use of the file is impossible - all that remains is to change the nozzle.
• It is necessary to move the roller file in the direction "to itself". By driving it away from you, you move as opposed to moving the video itself, which leads to its breakdown.

• The file works quickly and removes the skin from the feet very wellso do not press it into the heel and do not process one place for more than 10 seconds. Although manufacturers say that pedicure files with a battery do not remove the living layer of the epidermis, it is better not to believe them. Clean off the live layer - the skin will grow faster and will be twice as rough.
• Process only the foot with the device, It is not intended for nails on the feet - and even more so for manicure. Hitting under the roller hair, clothing leads to clogging and additional costs for consumables.
• The file cannot be used if there are deep cracks on the skin., there are warts, especially - moles or papillomas.

Many women note the uselessness of the grinding procedure for legs that are in a neglected state: for example, after the summer season or for those who do a pedicure once a month, do not use creams, but at the same time “on their feet” (sellers-consultants, couriers , teachers).

According to reviews, you can understand that electric files are designed only to keep your feet in good condition. The most advertised Scholl file is the least popular and according to ratings it is considered the most useless. Processing such a device takes at least 20 minutes. Many people prefer to steam their legs for 15 minutes, reading a book, and then rub their heels with a pumice stone for 5 minutes than hard-driving an electric saw along their legs for 20 minutes.

In this video you will see the presentation of the Scholl Velvet Smooth Wet & Dry electric nail file.